Mineral Embotellada Bottled Water Dispenser 580W 105L Free Standing

Free Standing Agua Mineral Embotellada Bottled Water Dispenser 105L Bottle Top Dispensers

Feature

• Bottled water dispensers appeared before the middle of the 20th century. The earliest water dispenser was a top-loading water dispenser, with a special connector on the top for inverting bottled water.
• In recent years, a bottom-loading water dispenser has appeared. Bottled water can be placed in the lower part of the machine and sucked by a suction pump. This method is safer and sanitary than conventional water dispensers. 105L can be also made into bottom loading type.

Water Cooling Theory

When the cooling switch is pressed, the green indicator light is on, the compressor starts to run, and the refrigerant vapor that has absorbed heat and vaporized in the evaporator is sucked back, and then compressed into high temperature and high pressure gas, and sent to condensation The condenser dissipates heat to the outside air and condenses into a high-pressure liquid, and then flows into the evaporator through capillary throttling and pressure reduction, absorbing the heat of the cold bladder to reduce the water temperature, and then being sucked back by the compressor. This cycle achieves the purpose of cooling down. When the water temperature drops to the set temperature with time, the cooling thermostat contacts are disconnected, the green indicator light goes out, the compressor stops, and it switches to the heat preservation mode. After the power is off, the water temperature gradually rises. When it reaches the set temperature, the contact action of the refrigeration thermostat is closed, the green indicator light is on when the power is turned on, and the compressor is running. In this way, the water temperature is controlled between 4-12°C.

Specifications